vagabond Posted June 8, 2013 Share Posted June 8, 2013 got tired of the squeaks and the noise from the wheel stops, put it up on the ramps and lubed the hell out of it, nice and quiet now Link to comment Share on other sites More sharing options...
bulletsforringo Posted June 14, 2013 Share Posted June 14, 2013 Changed the oil in my LSD, it needed it...badly. Also, found a leak I didn't know existed...still trying to find the source. Love it when that happens. Link to comment Share on other sites More sharing options...
Kingman Posted June 15, 2013 Share Posted June 15, 2013 Added more adjustment to my alternator bracket, got an ashtray for it, cleaned up the wiring from the previous people that ripped a lot of it apart, and took off my fender flares. I need a new hatch latch or weld it solid again, it squeaks going over bumps. Link to comment Share on other sites More sharing options...
nunya Posted June 15, 2013 Share Posted June 15, 2013 Which part of the hatch latch Kingman? Link to comment Share on other sites More sharing options...
Kingman Posted June 15, 2013 Share Posted June 15, 2013 On the chassis. The hoop is separating from the flat bracket. That and the upper hinges are worn out, its annoying. Link to comment Share on other sites More sharing options...
nunya Posted June 15, 2013 Share Posted June 15, 2013 I got one, Which means you will have one lemme look if I still have your address somewhere. Link to comment Share on other sites More sharing options...
Kingman Posted June 15, 2013 Share Posted June 15, 2013 Thanks bud! I think I was sneaky when I sent you that transmission cooler and didn't put it on the box and even then that was a few addresses ago. Link to comment Share on other sites More sharing options...
nunya Posted June 16, 2013 Share Posted June 16, 2013 Ahh, then you might wanna update me Kyle put that belt in, right? Any other blue interior stuff need some replacement? I still got a lot of WhiteOwls old blue stuff. Link to comment Share on other sites More sharing options...
Nefarious Posted June 16, 2013 Share Posted June 16, 2013 (edited) Worked on my girls 93.. 4 of the 6 front skid plate bolts were snapped off so I drilled them all out, expanded the holes and tapped them for M8x1.25 bolts. She now has a skidplate again. Also removed and replaced the cam seals and front main seal on her VG33E that's just about ready to go in. Edited June 16, 2013 by Nefarious Link to comment Share on other sites More sharing options...
MY1PATH Posted June 16, 2013 Share Posted June 16, 2013 began designing my HD skid plate...Its gonna be bad@$$... one day... Link to comment Share on other sites More sharing options...
ahardb0dy Posted June 16, 2013 Share Posted June 16, 2013 Yesterday, replaced the positive battery terminal, negative one will be done today maybe. Link to comment Share on other sites More sharing options...
dedman Posted June 19, 2013 Share Posted June 19, 2013 I replaced my spark plugs and wires on mine yesterday. Cylinder 6 is evil, but wasn't as bad as i thought. Link to comment Share on other sites More sharing options...
ahardb0dy Posted June 19, 2013 Share Posted June 19, 2013 installed the new Negative battery terminal Link to comment Share on other sites More sharing options...
MY1PATH Posted June 19, 2013 Share Posted June 19, 2013 (edited) So today I fabricated my final cardboard template for my Bomber Skid to go with my Bomb Proof Crossmember Then put the 1/4" plate steel into production and It will look very much like the cardboard below. Yes, I've been driving around with a cardboard skid plate template bolted to my truck Edited June 19, 2013 by MY1PATH 1 Link to comment Share on other sites More sharing options...
nunya Posted June 19, 2013 Share Posted June 19, 2013 Yes, I've been driving around with a cardboard skid plate template bolted to my truck How else you gonna R&D something? That's a legit excuse! Link to comment Share on other sites More sharing options...
MY1PATH Posted June 19, 2013 Share Posted June 19, 2013 (edited) I deiced that the extensive trail damage over the years had not smashed my core support enough... So this morning I decided to smash it even more using a jack and a crow bar! Now it sits completely above the frame... All the rust marks are from all chipped paint on the core support and from my temporary skid plate. Edited June 19, 2013 by MY1PATH Link to comment Share on other sites More sharing options...
mastersryan Posted June 19, 2013 Share Posted June 19, 2013 lifted her up... Link to comment Share on other sites More sharing options...
Slartibartfast Posted June 20, 2013 Share Posted June 20, 2013 Amp removal/bypass! Pretty easy actually. Pics to come. Link to comment Share on other sites More sharing options...
Nefarious Posted June 27, 2013 Share Posted June 27, 2013 Fired it up for the first time in a couple months.... the old girl is coming out of retirement... had to jump it...ran like poop at first. Cleaned off the battery terminals of all the junk and corrosion and ripped it up and down the street a few times. Runs like a champ again. Good old reliable pathy! just got my welding extension cord so I can fix my pathys frame and she is back in action for the summer. I might start doing some mobile mechanic work through the summer until school starts again, so ill need my truck again! Then I spent the rest of the day tearing into a lifted sidekick. Nice little rig. Definitely not as beef as a pathy but it looks capable. New cv axle, seals, brakes, repack bearings. Productive day! Link to comment Share on other sites More sharing options...
Bluewulf73 Posted June 28, 2013 Share Posted June 28, 2013 (edited) Picked him up from the service centre at Nissan. Now that he's all fixed, sadly, I must sell him off to another home. Family situation has changed, no two wasy about it. Damn! I just put on my NPORA stickers too... Edited June 28, 2013 by Bluewulf73 Link to comment Share on other sites More sharing options...
BBB Posted July 1, 2013 Share Posted July 1, 2013 I bypassed the amp for the rear speakers by jumpering the pins on the connector. I did this for the front speakers about 2 months ago. My Kenwood HU has plenty power to drive all 8 speakers without the OEM amps. Sounds good enough for me Also washed it and took a close look at the paint. I'm going to buy a MOP and give it a try. I'll post pics later. Link to comment Share on other sites More sharing options...
Kingman Posted July 1, 2013 Share Posted July 1, 2013 MOP? Link to comment Share on other sites More sharing options...
k9sar Posted July 1, 2013 Share Posted July 1, 2013 put my hand through the frame... again Link to comment Share on other sites More sharing options...
tdauria Posted July 1, 2013 Share Posted July 1, 2013 @k9sar i know that feel bro. :'( Link to comment Share on other sites More sharing options...
BBB Posted July 2, 2013 Share Posted July 2, 2013 MOP? one of these bad larrys I know, Iknow, I watch too many car shows on TV Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now